·         CPU

1.    Support for 7^th/6^th Generation Intel^® Core™ i7 processors/Intel^® Core™ i5 processors/Intel^® Core™ i3 processors/Intel^®Pentium^® processors/Intel^® Celeron^® processors in the LGA1151 package

2.    L3 cache varies with CPU

(Please refer "CPU Support List" for more information.)

·         Chipset

1.    Intel^® H110 Express Chipset

·         Memory

1.    2 x DDR4 DIMM sockets supporting up to 32 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.

2.    Dual channel memory architecture

3.    Support for DDR4 2400/2133 MHz memory modules

4.    Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

5.    Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules

6.    Support for Extreme Memory Profile (XMP) memory modules
* To support 2400 MHz or XMP memory, you must install a 7^th generation processor.

(Please refer "Memory Support List" for more information.)

·         Onboard Graphics

Integrated Graphics Processor - Intel^® HD Graphics support:

1.    1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

Maximum shared memory of 1 GB

·         Audio

1.    Realtek^® ALC887 codec

2.    High Definition Audio

3.    2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.

4.    Support for S/PDIF Out

·         LAN

1.    Realtek^® GbE LAN chip (10/100/1000 Mbit)

·         Expansion Slots

1.    1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)

2.    5 x PCI Express x1 slots
(All of the PCI Express x1 slots conform to PCI Express 2.0 standard.)

* When two or more graphics cards are installed, be sure to connect the power cable from the power supply to the PCIE_12V_1 or PCIE_12V_2 connector to provide sufficient current to the system and prevent damage to the devices.

·         Storage Interface

Chipset:

1.    1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA SSD support)

2.    4 x SATA 6Gb/s connectors
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.

·         USB

Chipset:

1.    4 x USB 3.1 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

2.    6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

·         Internal I/O Connectors

1.    1 x 24-pin ATX main power connector

2.    1 x 8-pin ATX 12V power connector

3.    2 x PCIe power connectors

4.    1 x CPU fan header

5.    3 x system fan headers

6.    4 x SATA 6Gb/s connectors

7.    1 x M.2 Socket 3 connector

8.    1 x front panel header

9.    1 x front panel audio header

10.                                               1 x S/PDIF Out header

11.                                               1 x USB 3.1 Gen 1 header

12.                                               2 x USB 2.0/1.1 headers

13.                                               1 x Trusted Platform Module (TPM) header

14.                                               1 x Clear CMOS jumper

·         Back Panel Connectors

1.    1 x PS/2 mouse port

2.    1 x PS/2 Keyboard port

3.    1 x parallel port

4.    1 x serial port

5.    1 x D-Sub port

6.    2 x USB 3.1 Gen 1 ports

7.    2 x USB 2.0/1.1 ports

8.    1 x RJ-45 port

9.    3 x audio jacks (Line In, Line Out, Mic In)

·         I/O Controller

1.    iTE^® I/O Controller Chip

·         H/W Monitoring

1.    Voltage detection

2.    Temperature detection

3.    Fan speed detection

4.    Overheating warning

5.    Fan fail warning

6.    Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.

·         BIOS

1.    2 x 64 Mbit flash

2.    Use of licensed AMI UEFI BIOS

3.    Support for DualBIOS™

4.    PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

·         Unique Features

1.    Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
3D OSD
@BIOS
Ambient LED
AutoGreen
Cloud Station
EasyTune
Fast Boot
ON/OFF Charge
Smart TimeLock
Smart Keyboard
Smart Backup
System Information Viewer
USB Blocker

2.    Support for Q-Flash

3.    Support for Xpress Install

·         Bundle Software

1.    Norton^® Internet Security (OEM version)

2.    cFosSpeed

·         Operating System

1.    Windows^® 10 64-bit (for 7^th Generation Intel^® Processors)

2.    Windows^® 10 64-bit / Windows^® 8.1 64-bit / Windows^® 7 32-bit / 64-bits (for 6^th Generation Intel^® Processors)
* Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.

·         Form Factor

1.    ATX Form Factor; 30.5cm x 19.0cm